16 Port gigabit PoE + 4G SFP L2+ full Managed Industrial PoE+ Switch EL416MGI, EL416MGPI (1-16 Port PoE)

EL416GPI :
Origin : Made in China

Brand: ELINPOE

Model: EL416MGI, EL416MGPI

Color: Black

Size(L*W*H):166 *141 *78mm

Weight: 1.5Kgs

Materials: Hardended aluminun

Installation: Din rail

Dual power input: DC48V-57V(PoE)  DC12-52V 

Application: outdoor traffic cross,expressway ETC,Oil station,coal mine,electricty station, water treatment station,factory automation,underground pipe gallery etc.


Description of Switch

The EL416GPI is a full Gigabit managed industrial PoE switch. it has 16 Port 10/100/1000M PoE ports and 4 Port 1000M SFP fiber ports port , 1-16 can support IEEE 802.3af/at standard PoE power supply, single PoE power port up to 30W. As a PoE power supply device, it can automatically detect and identify the electrical equipment that meets the standard and supply power through the cable. It can supply the PoE terminal equipment, such as wireless AP, network camera, network telephone, industrial sensor and so on, to meet the demand for high density PoE power supply network environment. It is suitable for intelligent transportation, rail transportation, electric power industry, mining, metallurgy and green energy construction, ect.


    ★ IP40 Aluminum full gigabit L2+ managed Industrial switch

    ★ 16 Port 10/100/1000Mbps RJ45 and 4G SFP

    16 Port PoE output

    ★ Support 802.1q VLAN. Support RSTP/MSTP spanning tree. 

    ★ Support 802.1X certification , IPV6, SSL, QoS SNMP(V1/V2/V3), IGMP Snooping, etc.

    ★ IPv4/IPv6 Static Routing, Address Resolution Protocol (Static ARP) Support VLAN, ACL, ERPS ring network

    ★ Power supply: DC48V-57V






    Specification of Switch

    Model No.

    EL416MGPI

    1000Base-TX Port

    16 Port RJ-45 auto-MDI / MDI-X

    1000Base-FX Port

    4G SFP Slot

    PoE Specification

    PoE Standard: IEEE802.3af/ IEEE802.3at

    PoE ports:1-16 port support PoE(max.)

    Power Output:

    Max. 15.4 watts (IEEE 802.3af)

    Max. 30 watts (IEEE 802.3at)

    PoE port Auto detect af/at devices

    Output Voltage: DC48V

    Power Pin Assignment:1/2+;3/6-

    Power Type: End-span( Mid-span optional)

     

    Performance Specification

    Bandwidth: 56Gbps
    Packet Buffer Memory:
    12Mbit
    Packet Forwarding Rate:
    42Mpps

    MAC Address Table: 8K

    Installation

    DIN rail

    Maximum Frame Size

    10240bytes packet size

    Flow Control

    Back pressure for half duplex, IEEE 802.3x pause frame for full duplex

    Enclosure

    IP40 Aluminum housing

     

    LED Indicator

    Power: Red

    Fiber: Link (Green)

    Ethernet: Yellow

    Power Input

    48 to 57V DC redundant power

    Power Consumption

    < 10W

    Surge protection

     ± 4KV

     

    Network Protocols

    IEEE802.3 10BASE-T;

    IEEE802.3i 10Base-T;

    IEEE802.3u;100Base-TX/FX;

    IEEE802.3ab 1000Base-T; 

    IEEE802.3z 1000Base-X;

    IEEE802.3x;

    Network cables

    10BASE-T: Cat3,4,5 UTP(≤100 meter)    

    100BASE-TX: Cat5 or later UTP(≤100meter)

    1000BASE-TX: Cat6 or later UTP(≤100 meter)

     

     

    Industry Standard

    FCC CFR47 Part 15,EN55032 Class A

    IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air)

    IEC61000-4-3 (RS): 10V/m (80~1000MHz)

    IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV

    IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV

    IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)

    IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)

    MTBF

    300,000hours

    Dimensions (W x D x H)

    166×142×78mm 

    Weight

    Product Weight: 1.4KG

    Packing Weight: 1.5KG

    Working Environment

     

    Working temperature: -4085

    Storage temperature: -4085

    Relative Humidity: 5%~95 %( no condensation)